Blackstone Roofing Enterprises
Call (239) 227-7054 Request Estimate

Home COMMERCIAL

Commercial roofs,
bid from the drawings.

New construction, re-roofs, and additions for general contractors, developers, and owners across South Florida. We bid from the plan set, install to the spec, and deliver the warranty package at closeout.

Markets Commercial · New Construction · Re-Roof
Systems All 6 — metal, tile, torch-applied, shingle, TPO
Service Area Sarasota → Miami, coast to coast
01 — Engagement

Two ways in.
Both end with a number you can trust.

How we engage depends on whether your project has drawings yet. Either path is fast, transparent, and ends with a written scope — no fluff, no upsell.

Track A — You have plans

Plans in.
Bid & proposal out.

For commercial new construction, send us the plan set and roof specification. We review the drawings, value-engineer the system if requested, and return a written bid and proposal — material, attachment pattern, warranty, and schedule, all on paper.

  1. You submit the architectural drawings and roof spec.
  2. We review the assembly, attachment, slope, and tie-ins.
  3. Manufacturer review for warranty eligibility (if applicable).
  4. Written bid & proposal returned to the GC or owner.
  5. Award, schedule, mobilize.
Track B — No plans, just a building

We come measure.
Free written estimate.

Re-roof, restoration, or repair on an existing commercial building without a current plan set? We drive the site, measure the field, photograph penetrations and tie-ins, and write you a free estimate with the system options and warranties laid out clearly.

  1. You call or submit a site request.
  2. We schedule an on-site walk — usually within the same week.
  3. Field measure, photograph, core-sample if required.
  4. Free written estimate with system options and warranties.
  5. Choose your scope, we mobilize.
02 — Systems

Six systems.
All six installed in-house.

We don't sub the work out. Each Blackstone crew is trained on manufacturer assemblies, wind-uplift attachment, fire ratings, and detailed flashings for the systems we install. Commercial projects can use any of the 6.

— 01 / Standing Seam Metal

Standing Seam,
Engineered to Lift.

Concealed-fastener standing seam and architectural metal built for Gulf Coast wind exposure. We engineer the clip spacing, panel gauge, and edge metal to your wind-zone calculations and run a tight crew on install to keep the field clean and the seams uniform.

  • Standing Seam
  • Concealed Fastener
  • Galvalume
  • Aluminum
  • Copper / Zinc
  • Custom Flashings
  • Coastal-Rated Finish
  • Engineered Clip Spacing
Standing seam metal roof at Bay Pines Medical Center, a commercial install by Blackstone Roofing
— 02 / 5V Crimp Metal

5V Crimp
Metal Panel.

Exposed-fastener metal with five V-crimps per panel — the classic Florida profile. On commercial work it earns its place on low-rise, agricultural, and light-industrial buildings, and on any project where a metal roof's lifespan is wanted without standing seam's cost. Simpler to install, and still high wind-rated when detailed correctly.

  • 5V Crimp
  • Exposed Fastener
  • Galvalume
  • Painted Steel
  • Coastal-Rated Finish
  • Value Engineered
  • Low-Rise / Light Industrial
  • High Wind-Rated
5V crimp metal roof on a canal-front Southwest Florida home — exposed-fastener panel with five V-crimps per sheet
— 03 / Tile Systems

Clay & Concrete
Tile, Installed Right.

Barrel, flat, and S-tile on engineered self-adhered underlayments. Hand-cut hips, ridges, and valleys to the drawings. We don't substitute underlayments to win a bid — the install is built to outlast the tile.

  • Barrel Tile
  • Flat Tile
  • S-Tile
  • Clay
  • Concrete
  • Self-Adhered Underlayment
  • Mechanically Fastened
  • Foam-Adhered
Aerial view of a commercial tile roof field alongside a flat roof section, install in progress
— 04 / Torch-Applied

Modified
Bitumen, Multi-Ply.

SBS and APP modified bitumen — torch-applied to spec on flat and low-slope sections. The right answer for parapets, terraces, and complex tie-ins where heat-weld reliability matters more than the dollar-per-square headline. Torch certifications kept current across the crew.

  • SBS
  • APP
  • Multi-Ply Assemblies
  • Smooth or Granulated Cap
  • Heat-Welded Seams
  • Cold-Applied Adhesive (Alt)
  • Parapet & Tie-In Detail
  • Tear-Off & Recover
Torch-applied modified bitumen roof deck at Bay Pines Medical Center
— 05 / Architectural Shingle

Architectural
Shingle.

Dimensional laminated asphalt shingle — the cost-controlled pitched-roof system for commercial low-rise, multi-family, hospitality cottages, and clubhouse buildings. High-wind nailing patterns, sealed starter and hip-and-ridge, synthetic underlayment, and ice-and-water shield at penetrations.

  • Dimensional / Laminated
  • High-Wind Nailing
  • Synthetic Underlayment
  • Starter & Hip-Ridge
  • Multi-Family / Hospitality
  • Multiple Colours & Profiles
  • Manufacturer Warranty
  • Code-Compliant Install
Architectural laminated shingle roof — residential install using the same assembly and high-wind nailing pattern Blackstone runs on commercial low-rise
— 06 / TPO · Flagship Certification

Induction-Welded
TPO.

Single-ply TPO installed with an induction-welded attachment — fewer fasteners, fewer field seams, and significantly better wind-uplift performance than a mechanically attached system. Blackstone is a certified RhinoBond installer working in GAF and IKO membranes — the manufacturer trains the crews and signs off on the warranty.

★ Certified RhinoBond Installer
  • Induction-Welded
  • Mechanically Attached
  • Fully Adhered (Alt)
  • 45 / 60 / 80 mil
  • GAF · IKO
  • White / Tan / Gray
  • Enhanced Wind Uplift
  • Manufacturer Warranty
  • Commercial Only
Completed white induction-welded TPO commercial roof in Southwest Florida
03 — Sectors

Where we work,
across South Florida.

Owners and GCs across these sectors trust Blackstone with the roof on day one and the warranty for the next twenty years.

  • Office & Class-A →
  • Retail & Mixed-Use →
  • Multi-Family & Condo →
  • Industrial & Warehouse →
  • Healthcare & Medical →
  • Hospitality & Resort →
  • Education & Public →
  • Auto & Showroom →
  • Restaurant & QSR →
04 — Who We Work With

Same roof.
Three different decisions.

A general contractor is buying schedule certainty. A property manager is buying a scope that survives a board meeting. An owner is buying an honest answer about how much life is left. Pick the one that's you.

If you're a General Contractor Bid from your set, prequal package ready, daily field logs, and one trade we crew ourselves.  → If you're a Property Manager Board-ready documented scopes, phased work on occupied buildings, certificates to the association.  → If you're a Building Owner A straight repair-or-replace answer, and help reading why a cheaper bid is cheaper.  →
We bid the roof we want to install — not the one that looks cheapest on paper.
— Blackstone Roofing Enterprises LLC
Start a Commercial Bid

Send the plans.

Forward the architectural drawings and roof spec — we'll return a bid and proposal. No drawings? Tell us the address; we'll measure and write a free estimate.

Request a Bid Call (239) 227-7054
Call Now Free Estimate